uparrow.jpg (1468 bytes)Return to menu

Dial-in on a Windows system

Windows 95 Remote Access Setup

The intent of this document is to assist you setup dial-in access to Santa Monica College. The following are the requirements for this setup.

 

  1. Step 1: Install Dial-Up Networking.

Dial-Up Networking can be found in by left clicking on the Start Button, Move the cursor up to Programs, then Accessories. If you see the Dial-Up Networking folder Skip to Step 2. If you do not see the Dial-Up Networking Folder follow these installation instructions.

    1. Left Click on the Start Button at the Bottom Left of the Screen.
    2. Move the Cursor up to Settings then right to Control Panel.
    3. Left Click on the Control Panel.
    4. Double Left Click on the Icon Add/Remove Windows Programs.
    5. Left Click on the tab Windows Setup.
    6. Double Left Click on Communications.
    7. Check the box for Dial-Up Networking, by Left Clicking in the Box.
    8. You will then be prompted to insert your Windows 95 Diskettes or CD.
    9. After Installation click OK and Close the Control Panel by Clicking on the X in the upper Right Hand Corner.

II. Step 2: Add TCP/IP Protocol Stack.

    1. Right Click on Network Neighborhood to bring up Pop-Up Menu.
    2. Move the Cursor to Properties and Left Click on Properties. (Figure1)
    3. Left Click on the Add Button.
    4. Double Left Click Protocol.
    5. Left Click Microsoft then Double Left Click on TCP/IP.
    6. Left Click on the Client for Microsoft Network and Left click on Properties.
    7. Left Click in the box next to Log on to Windows NT domain.
    8. Enter SMC in the Windows NT domain text box and Left click on OK.
    9.  Left Click on the Tab called Identification at the top of the window.
    10. Enter your name in the computer name box, SMC in the Workgroup box and your name again in the description box.
    11. Left click on the Tab Configuration.
    12. Left Click IPX/SPX, Left Click Remove.
    13. Left Click NETBEUI, Left Click Remove.
    14. Click OK and Restart your Computer.
  1. Step 3: Create a Santa Monica College Dial-Up Networking Connection.
    1. Left Click on the Start Button at the Bottom Left of the Screen.
    2. Move the Cursor up to Programs then up to Accessories, then Down to Dial-Up Networking, Left Click on Dial-Up Networking.
    3. If you see the Dial-Up Networking Group Double Left Click on Make New Connection. Otherwise Left Click on Next.
    4. Type in Santa Monica College for the Computer You are Dialing. Left Click Next.
    5. Enter the Area Code and Phone Number for the Campus. Left Click Next. Left Click Finish.
    6. The remote access number for faculty and staff is 1-310-314-1376. The remote access number for students is 1-310-396-2482.
  1. Step 4: Dial-Up Campus.

Your Dial-Up Icon Can always be found by Start;Accessories;Dial-Up Networking.
    1. Double Left Click on the Santa Monica College Icon.
    2. Enter your username: Lastname_Firstname.
    3. Enter your password: This password is the same password you use to access your email.
    4. Left Click Connect.

Now you are connected to Santa Monica College’s Dial-Up Access Server. Use your Browser to access email at http://faculty.smc.edu/exchange . Remember, You must have ver. 3.0 or greater of Netscape Navigator or Microsoft Internet Explorer to Access the Web Version of Santa Monica College’s Email.

Return to the Remote Access home page

Return to the SMC home page